Hikvision DS-3WF1000-EI-2N/P 2.4Ghz 300Mbps 1KM PoE Wireless Bridge Kit

-Up to 1 km wireless transmission distance

-300 Mbps 802.11n wireless bridge

-Built-in 7dBi 2 x 2 MIMO antenna

-Visualized topology management

-Real-Time alarm push technology

-Standard PoE Input & Output

-Plug and Play

General Product Dimensions (W × H × D) 90.8 mm × 187.87 mm × 57.87 mm (3.57'' × 7.39'' × 2.27'') Package Dimensions (W × H × D) 256 mm × 231 mm × 86 mm (10.07" × 9.09" × 3.38") Net Weight 0.26 kg (0.57 lb) per device Gross Weight 1.1 kg (2.43 lb) Packing List Wireless Bridge × 2,Binding Tape × 4,Quick Start Guide ×1,Regulatory Compliance and Safety Information × 1,PoE Power Supply × 2,AC Cord × 2 Packing Method Packing in pairs Working Temperature -30 °C to 60 °C (-22 °F to 140 °F) Working Humidity 5% to 95% (no condensation) Storage Temperature -40 °C to 80 °C (-40 °F to 176 °F) Storage Humidity 5% to 95% (no condensation) Installation Mode Pole Mounting Ingress Protection IP55 Power Consumption 1.8 W for typical (1-ch 2MP IPC), Max. 4.5 W Wireless Parameter Max. Transmission Rate of Air Interface ≤ 300 Mbps Wireless Standard IEEE 802.11b/g/n (2 × 2 MIMO 300 Mbps) Working Frequency Band 2400 MHz ~ 2483.5 MHz Antenna Gain 7 dBi Antenna Angle (H) Beamwidth [3 dB] 60°, (V) Beamwidth [3 dB] 50° Transmitting Power 22 dBm @11n MCS0 (Note: Transmitting power may vary with local regulations.) Receiving Sensitivity -87±2 dBm @HT40 MCS0 Throughput Rate PTP: 90 Mbps/0.2 KM(HT40),90 Mbps/0.5 KM(HT40),70 Mbps/1 KM(HT40),PTMP(1 to 4): 40 Mbps/1 KM(HT40) Hardware Parameter Network Interface 2 × 10/100 Mbps RJ45 ports LED Indicator Power indicator,LAN indicator,Signal intensity indicator Reset Hardware resetting button Power Supply 48V PoE;Check the physical interface image below for more details Software Function Application Function IFM,IPM Channel Width 10/20/40 MHz Channel Selection Auto/manual selection Security Mode WPA2-PSK Security Mechanism Wireless network name hidden Network Protocol NTP (network time synchronization),SADP (auto search for IP address), HTTPS/HTTP (web management),SSH (debugging) Management Method HCP,Web,iVMS-4200,HPP System Log Syslog,Control center information Upgrade Web,iVMS-4200,HCP,HPP HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

1. Reboot device

2. Restore device

3. Display the topology information

4. Display the connection status between AP and CPEs, including signal intensity, background noise, sending & receiving rate

5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power

6. Bridge alignment

7. Spectrum scanning

8. PoE output management

PoE Power Supply PoE Port AP: LAN1 802.3af/at PoE IN; CPE: LAN1 passive PoE IN, LAN2 802.3 af PoE OUT PoE Power Budget 10 W PoE Distance 100 m Approval EMC CE-EMC(EN 55032, EN 50130-4, EN 55035, EN IEC 61000-3-2, EN 61000-3-3) Safety CB (IEC 62368-1),CE-LVD (EN 62368-1) Chemistry CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No