Fiber Optic

SC to SC connectorsYellow9/125 single-mode fiber cable with SC connectors is perfect for fast Ethernet, gigabit Ethernet, and other data applications.Single-mode fiber cable is an ideal solution for long-range networkingOFNR FT4 fire rated cable

SC to SC connectorsYellow9/125 single-mode fiber cable with SC connectors is perfect for fast Ethernet, gigabit Ethernet, and other data applications.Single-mode fiber cable is an ideal solution for long-range networkingOFNR FT4 fire rated cable

2 LC connectors on both sidesMultimode duplex fibre optic patch cable connects networking devices for high speed data transfer over long distancesIdeal for gigabit networks10 GIG50/1254700 MHz bandwidthOM4Aqua

This splice maintains physical contact between the fibers. An assembly tool is used to ensure the fibers are mated correctly, resulting in <0.1 dB insertion loss (typical for single-mode).The SpliceConnect secures both fiber and coating independently with the U-shaped sleeve,...

These mechanical splices are 40mm in length. (For use with our FO-SPLICE-KIT SpliceConnect Universal Mechanical Splicing Tool Kit) Physical Characteristics Color Grey Overall Dimensions 40 x 4 x 4mm Fiber Compatibility 250 micron & 900 micron Manufacturing Information AFL Part Number...

This fiber optic strip tool is designed for fiber optic cables with pre-defined strip sizes of 2mm, 900 micron and 250 micron. Fine adjustments can be done to the strip depth using the precision set screw. With its ergonomically designed...

This MPO/MTP removal tool is used to remove the outer housing of a MPO/MTP fiber optic connector, typically used to reverse Method A/B pinout or to add guide pins. Note: Pinout cannot be reversed on singlemode MPO/MTP cable due to...

OVERVIEW This pen shaped visual fault locator is a tool used on terminated fiber optic cables to locate sharp bends or breaks in jacketed or bare fiber. Note: Meant for use with polished, terminated fiber cables. Always insert and remove...

This a true one-step cleaver. The cleaver blade and fiber clamping mechanism is extremely easy to replace in the field. A manual scrap collector is included. Features Dual fiber adapter plate for single or two fiber cleaving Ambidextrous operation available...

This tubing is used to furcate 900 micron fiber cable.  Physical Characteristics Color Black/ Blue/ Aqua/ Brown/ Green/ Slate/ Orange/ Purple/ Pink/ Red/ Yellow/ White Outer Jacket Material PVC Strength Member Aramid Yarn Ribbon furcation tube material PVC Fucation tube...

This fiber dust cap fits LC female simplex ports. It is typically used to help keep contaminants out of LC ports. Physical Characteristics Color Beige Connector(s) Connector Fits LC Female Simplex Port Environmental RoHS Yes Packaging Information Package Quantity 100...

These boots are designed to fit SC connectors on 3mm fiber optic cable. The boots are available in multiple colors. Physical Characteristics Colors Black/Blue/Green/Red Material PVC Connector Compatibility SC Inside Diameter 3.0mm Length 40.0mm Environmental RoHS Yes Packaging Information Package...

These boots are designed to fit LC connectors on 2mm fiber optic cable. The boots are available in multiple colors. Physical Characteristics Colors Black/Blue/Green/Red/White Material PVC Connector Compatibility LC Inside Diameter 2.0mm Length 28.5mm Environmental RoHS Yes Packaging Information Package...

These boots are designed to fit LC connectors on 3mm fiber optic cable. The boots are available in multiple colors. Physical Characteristics Colors Aqua/Black/Blue/Green/Red/White Material PVC Connector Compatibility LC Inside Diameter 3.0mm Length 28.5mm Environmental RoHS Yes Packaging Information Package...

These boots are designed to fit SC connectors on 2mm fiber optic cable. The boots are available in multiple colors. Physical Characteristics Colors Aqua/Black/Blue/Green/Red/Rose Material PVC Connector Compatibility SC Inside Diameter 2.0mm Length 40.0mm Environmental RoHS Yes Packaging Information Package...

These boots are designed to fit ST connectors on 2mm fiber optic cable. The boots are available in multiple colors. Physical Characteristics Colors Aqua/Beige/Black/Green/Red/White Material PVC Connector Compatibility ST Inside Diameter 2.0mm Length 31.0mm Environmental RoHS Yes Packaging Information Package...

These boots are designed to fit ST connectors on 3mm fiber optic cable. The boots are available in multiple colors. Physical Characteristics Colors Beige/Black/Blue/Red/White/Yellow Material PVC Connector Compatibility ST Inside Diameter 3.0mm Length 31.0mm Environmental RoHS Yes Packaging Information Package...

This fiber dust cap fits MPO/MTP fiber cables. It is typically used to help keep contaminants off MPO/MTP fiber connectors. Physical Characteristics Color Black Connector(s) Connector MPO/MTP Environmental RoHS Yes Packaging Information Package Quantity 100 Product Weight 0.06 lbs [0.02kg]...

This tubing is used to furcate 900 micron fiber cable.  Physical Characteristics Material Steel Sub Unit Diameter Supported 900 Micron Packaging Information Product Weight (per m) 0.05 lbs [0.02 kg]

This fiber dust cap fits LC simplex fiber cables. It is typically used to help keep contaminants off LC fiber connectors. Physical Characteristics Color Beige Ferrule Diameter 1.25mm Connector(s) Connector Fits LC Simplex Fiber Cable Environmental RoHS Yes Packaging Information...

This fiber dust cap fits SC, ST and FC simplex fiber cables. It is typically used to help keep contaminants off SC, ST and FC fiber connectors. Physical Characteristics Color Translucent White Ferrule Diameter 2.50mm Connector(s) Connector Fits SC, ST,...

This fiber dust cap fits LC female duplex ports. It is typically used to help keep contaminants out of LC ports. Physical Characteristics Color Black Connector(s) Connector Fits LC Female Duplex Port Environmental RoHS Yes Packaging Information Package Quantity 100...

This fiber dust cap fits SC female simplex ports. It is typically used to help keep contaminants out of SC ports. Physical Characteristics Color Black Connector(s) Connector Fits SC Female Simplex Port Environmental RoHS Yes Packaging Information Package Quantity 100...

This fiber dust cap fits ST female simplex ports. It is typically used to help keep contaminants out of ST ports. Physical Characteristics Color Black Connector(s) Connector Fits ST Female Simplex Port Environmental RoHS Yes Packaging Information Package Quantity 100...

This fiber optic pulling eye kit includes cable netting, adhesive shrink tube, non-adhesive shrink tube, one pull cord attached with cast steel round eye spring snap. It is typically used as a pulling point with properly distributed tensions on cable...

This fiber optic splice tray holds 24 fiber splices and works with 40mm mini splice sleeves. It is used to provide protection and organize fiber splices.  Physical Characteristics Color Beige Dimensions 155mm x 91mm x 10mm Mounting Dimensions Center Mount...

These extra slim fiber optic splice protection sleeves are 40mm in length, have a heat shrink outer tube, a hot melt glue inner tube and a strength member. It is used to protect fiber splices in field installations. (For use with...

This fiber optic splice tray holds 12 fiber splices and works with 60mm splice sleeves. It is used to provide protection and organize fiber splices.  Physical Characteristics Color Black Dimensions 156mm x 96mm x 12mm Mounting Dimensions Center Mount or...

This fiber optic splice tray holds 24 fiber splices and works with 60mm splice sleeves. It is used to provide protection and organize fiber splices. Physical Characteristics Color White Dimensions 216mm x 115mm x 12mm Mounting Dimensions See Image Capacity...

These fiber caution tags come with two cable ties per tag and are used to mark fiber optic cable in indoor and outdoor applications. They can be installed in wrap around or flag style.  Physical Characteristics Color Yellow Dimensions 45mm...

These fiber optic splice protection sleeves or 40mm in length, have a heat shrink outer tube, a hot melt glue inner tube and a strength member. It is used to protect fiber splices infield installations. (For use with our items PP-F1512-BK,...

This fiber optic fan-out kit is designed to terminate 12-fiber loose-tube cables. It can be used on 250um fiber cable and furcates it to 900um. Epoxy is not required since the fan-out assembly snaps together.  Physical Characteristics Length 40 inches...

These fiber optic splice protection sleeves or 60mm in length, have a heat shrink outer tube, a hot melt glue inner tube and a strength member. It is used to protect fiber splices infield installations. (For use with our items PP-F1500-BK,...

This multimode fiber optic media converter can extend a 10G Ethernet connection up to 300m over a multimode LC fiber optic cable. The converter can be used as a standalone unit or in pairs. Features One10G/5G/2.5G/1G/100BASE-T RJ45 interface with auto...

This bi-directional 10G singlemode to multimode media converter allows communication between singlemode and multimode fiber optic cable networks. It can be used for connection between fiber to fiber 10Gbps equipment function as fiber mode converter, or as fiber repeater for...

This bi-directional 10/100/1000Mbps singlemode to multimode media converter allows communication between singlemode and multimode fiber optic cable networks. It can support a total distance of 2km over a SC multimode cable and 20k over a SC singlemode cable. Physical Characteristics...

This bi-directional 10/100Mbps singlemode to multimode media converter allows communication between singlemode and multimode fiber optic cable networks. It can support a total distance of 2km over a SC multimode cable and 20km over a SC singlemode cable. Physical Characteristics...

This singlemode fiber optic media converter can extend a 10/100/1000 Mbps Ethernet connection up to 40km over a singlemode ST fiber optic cable. The converter can be used as a standalone unit or in pairs. Features Supporting IEEE802.3 10 Base-T...

This singlemode fiber optic media converter can extend a 10/100/1000 Mbps Ethernet connection up to 40km over a singlemode LC fiber optic cable. The converter can be used as a standalone unit or in pairs. Features Supporting inter-conversion between 10/100/1000Base-TX...

This singlemode fiber optic media converter can extend a 10/100/1000 Mbps Ethernet connection up to 40km over a singlemode SC fiber optic cable. The converter can be used as a standalone unit or in pairs. It can also be mounted...

This multimode fiber optic media converter can extend a 10/100/1000 Mbps Ethernet connection up to 550m over a multimode ST fiber optic cable. The converter can be used as a standalone unit or in pairs.  Features Supporting IEEE802.3 10 Base-T...

This multimode fiber optic media converter can extend a 10/100 Mbps Ethernet connection up to 2 km over a multimode SC fiber optic cable. The converter can be used as a standalone unit or in pairs. It can also be...

This singlemode fiber optic media converter can extend a 10/100 Mbps Ethernet connection up to 30 km over a singlemode SC fiber optic cable. The converter can be used as a standalone unit or in pairs. It can also be...

This multimode fiber optic media converter can extend a 10/100/1000 Mbps Ethernet connection up to 550m over a multimode SC fiber optic cable. The converter can be used as a standalone unit or in pairs. It can also be mounted...

This multimode fiber optic media converter can extend a 10/100/1000 Mbps Ethernet connection up to 550m over a multimode LC fiber optic cable. The converter can be used as a standalone unit or in pairs.  Features Supporting inter-conversion between10/100/1000Base-TX and...

This PLC splitter is used to divide a light beam into multiple light beams for distribution to multiple terminals. Features: Low insertion loss Low PDL Compact Design Good channel-to-channel uniformity Wide operating wavelength from 1260nm to 1650nm High reliability and...

This PLC splitter is used to divide a light beam into multiple light beams for distribution to multiple terminals.  Features: Low insertion loss Low PDL Compact Design Good channel-to-channel uniformity Wide operating wavelength from 1260nm to 1650nm High reliability and...

This PLC splitter is used to divide a light beam into multiple light beams for distribution to multiple terminals. Features: Low insertion loss Low PDL Compact Design Good channel-to-channel uniformity Wide operating wavelength from 1260nm to 1650nm High reliability and...