Hikvision DS-3E1326P-EI 24 Port Fast Ethernet Smart Managed Long Range 370W POE+ Switch

-24 × 10/100M PoE ports, 2 × Gigabit combos.

-Total PoE Power Budget 370 W

-Support 802.1Q VLAN

-Support PoE watchdog to detect and restart the cameras that do not respond

-Support STP/RSTP Loop prevention

-Support cable detection to locate failure

-Up to 300 m Long Range PoE Transmission

-6 kV Surge Protection

DS-3E1326P-EI

Shell Metal material Net Weight 2.83 kg (6.24 lb) Gross Weight 3.8 kg (8.38 lb) Dimensions (W × H × D) 440.00 mm × 44.00 mm × 220.80 mm (17.32'' × 1.73'' × 8.69'') Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Storage Temperature –40 °C to 85 °C (–40 °F to 185 °F) Operating Humidity 5% to 95% (no condensation) Relative Humidity 5% to 95% (no condensation) Power Supply 100-240 VAC, 50/60 Hz, Max. 6.3 A Max. Power Consumption 400W Power Consumption in Idle 30 W Installation Mode Rack (equipped with mounting ears) Surge Protection 6 KV

Network Parameters

Ports 24 × 10/100 Mbps PoE port, 2 × Gigabit combo MAC Address Table 16 K Switching Capacity

Whole-Device Performance: 14.8 Gbps

Port Performance: 8.8 Gbps

Packet Forwarding Rate

Whole-Device Performance: 11.01 Mpps

Port Performance: 6.55 Mpps

Internal Cache 4 Mbits

PoE Power Supply

PoE Standard IEEE 802.3af;IEEE 802.3at PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) PoE Port PoE: Ports 1 to 24 Max. Port Power 30W PoE Power Budget 370W

Software Function

Long Range

Ports 1 to 24: up to 300 m.

Long range performance may vary depend on camera model or cable condition.

VIP Port

Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.

Port Isolation

Ports 1 to 24: port isolation mode to improve network security

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 24: auto detect and restart the cameras that do not respond.

Link Aggregation

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Support static link aggregation.

Support 1 aggregation group(s).

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

Support 802.1D STP.

Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement.

Support 802.1Q.

Configurable VLAN ID from 1-4094.

Support Trunk, Access port mode.

Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

1. Display the port rate.

2. Display the port bandwidth utilization rate.

3. Display the PoE power usage.

4. Display topology information.

5. Display the alarm status.

6. Restart ports and devices.

7. Enable port long-rage mode.

8. Remotely upgrade the device.

System Maintenance

Support device management via