Hikvision DS-3E1309P-EI 8 Port Fast Ethernet Smart Managed Long Range 110W POE+ Switch

-8 × 10/100M PoE ports,1 × Gigabit RJ45 port

-Total PoE Power Budget 110 W

-Support 802.1Q VLAN

-Support PoE watchdog to detect and restart the cameras that do not respond

-Support STP/RSTP Loop prevention

-Support cable detection to locate failure

-Up to 300 m Long Range PoE Transmission

-6 kV Surge Protection

DS-3E1309P-EI

Shell Metal material, fan-free design Net Weight 0.35 kg (0.77 lb) Gross Weight 1.114 kg (2.45 lb) Dimensions (W × H × D) 170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'') Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Storage Temperature –40 °C to 85 °C (–40 °F to 185 °F) Operating Humidity 5% to 95% (no condensation) Relative Humidity 5% to 95% (no condensation) Power Supply 54VDC，2.22A Max. Power Consumption 120 W Power Consumption in Idle 10 W Installation Mode Desk-Mounted,Wall-Mounted Surge Protection 6 KV

Network Parameters

Ports 8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port MAC Address Table 8 K Switching Capacity Whole-Device Performance: 5.6 Gbps Port Performance: 3.6 Gbps Packet Forwarding Rate Whole-Device Performance: 4.17 Mpps Port Performance: 2.68 Mpps Internal Cache 4 Mbits

PoE Power Supply

PoE Standard IEEE 802.3af;IEEE 802.3at PoE Power Pin End-span: 1/2(+), 3/6(-) PoE Port PoE: Ports 1 to 8 Max. Port Power 30W

Software Function

Long Range

Ports 1 to 8: up to 300 m.

Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 8: port isolation mode to improve network security

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 8: auto detect and restart the cameras that do not respond.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

Support 802.1D STP.

Suppport 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement.

Support 802.1Q.

Configurable VLAN ID from 1-4094.

Support Trunk, Access port mode.

Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

1. Display the port rate.

2. Display the port bandwidth utilization rate.

3. Display the PoE power usage.

4. Display topology information.

5. Display the alarm status.

6. Restart ports and devices.

7. Enable port long-rage mode.

8. Remotely upgrade the device.

System Maintenance

Support device management via web.

Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

Support management via Hik-Central Pro.

Support remote management via Hik-Partner Pro.

Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

Supports 802.1ab LLDP for peer d