{"product_id":"hikvision-ds-3e1510p-si-8-port-gigabit-smart-poe-switch-with-2-gigabit-fiber-optical-ports","title":"Hikvision DS-3E1510P-SI 8 Port Gigabit Smart POE Switch with 2 Gigabit Fiber Optical Ports","description":"\u003cp\u003e-8 × gigabit PoE ports, and 2 × gigabit fiber optical ports.\u003c\/p\u003e\u003cp\u003e-IEEE 802.3at\/af standard for PoE ports.\u003c\/p\u003e\u003cp\u003e-Network topology management, alarm push, network health monitor.\u003c\/p\u003e\u003cp\u003e-6 KV surge protection for PoE ports.\u003c\/p\u003e\u003cp\u003e-AF\/AT camera can reach up to 300 m in extend mode.\u003c\/p\u003e\u003cp\u003e-PoE watchdog to auto detect and restart the cameras that do not respond.\u003c\/p\u003e\u003cp\u003e-Various layer 2 management protocols such as STP\/RSTP, VLAN, link aggregation, SNMP, QoS and so on.\u003c\/p\u003e\u003cp\u003eGeneral\nShell\tMetal material\nNet Weight\t1.21 kg (2.67 lb)\nGross Weight\t1.3 kg (2.87 lb)\nDimensions (W × H × D)\t217.60 mm × 27.80 mm × 108.55 mm (8.57'' × 1.09'' × 4.27'')\nOperating Temperature\t0 °C to 40 °C (32 °F to 104 °F)\nStorage Temperature\t-40 °C to 85 °C (-40 °F to 185 °F)\nOperating Humidity\t5% to 95% (no condensation)\nRelative Humidity\t5% to 95% (no condensation)\nPower Supply\t48 VDC, 2.5 A\nInstallation Mode\tDesk-Mounted,Wall-Mounted\nMax. Power Consumption\t120 W\nPower Consumption in Idle\t7 W\nSurge Protection\t6 KV\nNetwork Parameters\nPorts\t8 × Gigabit PoE port,2 × Gigabit fiber optical port\nMAC Address Table\t8 K\nSwitching Capacity\t20 Gbps\nPacket Forwarding Rate\t14.88 Mpps\nInternal Cache\t4.1 Mbits\nPoE Power Supply\nPoE Standard\tIEEE 802.3af,IEEE 802.3at\nPoE Power Pin\tEnd-span: 1\/2(+), 3\/6(-);\nPoE Port\tPoE: Ports 1 to 8\nMax. Port Power\t30 W\nPoE Power Budget\t110 W\nSoftware Function\nLong Range\u003c\/p\u003e\u003cp\u003ePorts 1 to 8: up to 300 m.\u003c\/p\u003e\u003cp\u003eLong range performance may vary depend on camera model or cable condition.\u003c\/p\u003e\u003cp\u003ePort Isolation\u003c\/p\u003e\u003cp\u003ePorts 1 to 8: port isolation mode to improve network security.\u003c\/p\u003e\u003cp\u003ePorts in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.\u003c\/p\u003e\u003cp\u003ePoE Watchdog\tPorts 1 to 8: auto detect and restart the cameras that do not respond.\nLink Aggregation\u003c\/p\u003e\u003cp\u003eLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.\u003c\/p\u003e\u003cp\u003eSupport static link aggregation.\u003c\/p\u003e\u003cp\u003eSupport 8 aggregation groups.\u003c\/p\u003e\u003cp\u003eLoop Prevention\u003c\/p\u003e\u003cp\u003eLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.\u003c\/p\u003e\u003cp\u003eSupport 802.1D STP.\u003c\/p\u003e\u003cp\u003eQoS\u003c\/p\u003e\u003cp\u003eQoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.\u003c\/p\u003e\u003cp\u003eSupport port-based priority configuration.\u003c\/p\u003e\u003cp\u003eSupport SP, WRR priority schedule mode.\u003c\/p\u003e\u003cp\u003eVLAN\u003c\/p\u003e\u003cp\u003eVLAN is used for network scale planning and network health improvement.\u003c\/p\u003e\u003cp\u003eSupport 802.1Q.\u003c\/p\u003e\u003cp\u003eConfigurable VLAN ID from 1-4094.\u003c\/p\u003e\u003cp\u003eSupport Trunk, Access port mode.\u003c\/p\u003e\u003cp\u003eSupport Max. 4094 VLAN.\u003c\/p\u003e\u003cp\u003eHPP\u003c\/p\u003e\u003cp\u003eSupport one-click activation and remote management via Hik-Partner Pro. Functions supported:\u003c\/p\u003e\u003cp\u003e1. Display the port rate.\u003c\/p\u003e\u003cp\u003e2. Display the port bandwidth utilization rate.\u003c\/p\u003e\u003cp\u003e3. Display the PoE power usage.\u003c\/p\u003e\u003cp\u003e4. Display topology information.\u003c\/p\u003e\u003cp\u003e5. Display the alarm status.\u003c\/p\u003e\u003cp\u003e6. Restart ports and devices.\u003c\/p\u003e\u003cp\u003e7. Enable port long-rage mode.\u003c\/p\u003e\u003cp\u003e8. Remotely upgrade the device.\u003c\/p\u003e\u003cp\u003eSystem Maintenance\tRemote upgrade, default parameters recovery\u003c\/p\u003e","brand":"longtech","offers":[{"title":"Default Title","offer_id":55693286572351,"sku":"NET-HIKVISION-DS-3E1510P-SI","price":237.64,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0468\/5135\/8884\/files\/NET-HIKVISION-DS-3E1510P-SI-360x360.jpg?v=1790114728","url":"https:\/\/www.modcom.ca\/products\/hikvision-ds-3e1510p-si-8-port-gigabit-smart-poe-switch-with-2-gigabit-fiber-optical-ports","provider":"Modcom","version":"1.0","type":"link"}